Extruder Dog Food-manufacture,factory,supplier from China

dog food extruderThe dog food can be turned into many different shapes of dog food, and can be customized with different flavors. The raw materials are formed after high temperature and high pressure treatment, which is suitable for mass production and sales. Dog food equipment can realize automated production methods and greatly improve production efficiency.

Standards of Dog FoodThe standards stipulate requirements such as limit standards for nutrients, additives, microorganisms and heavy metals contained in dog food.Standards:1. Nutrients: including the requirements and proportion requirements of protein, fat, crude fiber, ash, moisture and other ingredients.2. Additives: stipulates various nutritional supplements that can be added to dog food, as well as limit requirements.3. Microorganisms: It is required that the number of various bacteria, molds and their metabolites in dog food cannot exceed the prescribed standards.4.

Dry Pet Food Market Analysis and Technical AdvantagesMarket Analysis:According to relevant data, dry food accounts for the majority of the current pet market and is gradually expanding. For example, the market share of dry dog food in the UK is about 33%, 34%, 75% in Spain and the Netherlands, 50% in France and Italy, and about 76% in the United States. Our country does not have specific statistics, but judging from surveys in the pet market , about 80% of the products sold are Qianxing food.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

Principles and Advantages of Puffed FoodPuffed food, also known as extruded food, exploding food, light food, etc., is a new type of food developed internationally in recent years. It uses grains, beans, potatoes, vegetables, etc. as raw materials, and is processed by puffing equipment to produce a wide variety of food with exquisite appearance, rich nutrition, crispy and delicious food. Therefore, a large category of food has been formed uniquely.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

Dog Chew Stick Processing LineDog chews gum is a kind of functional pet chewing food, which is used to meet the needs of chewing and biting during the growth of dogs, and maintain oral health through chewing to avoid the formation of dental plaque and dental stones.Function of dog chew1.

Advantages of twin-screw extrusion extruder(1) The adaptability of raw materials is wider, and it can adapt to the processing of raw materials with high viscosity, low viscosity, high oil content, high moisture or viscosity, oily, very wet and other slippery materials in single screw (SSE).(2) There are fewer restrictions on the particle size of raw materials, which can be adapted to the processing of raw materials with a wide particle size or from fine powder to coarse powder particles and raw materials with particle sizes outside the specific range of single-screw processing.(3) The material

First of all, we take the production of aquatic feed as an example, according to the material and purpose of the expansion from the structure of the single screw extruder and twin screw extruder,In general:--- Single screw extruder: suitable for processing all kinds of raw materials and common livestock and poultry compound feed.--- Twin-screw expander: The final product requires good molding and beautiful appearance, uniform maturation and adjustable density of compound feeds (aquatic food and pet food) and high value-added raw materials (alpha starches and histones), etc.

The main factors affecting the final moisture content of feed products are: the moisture content of the feed material itself, the moisture change in the crushing stage, the amount of liquid added in the mixing stage, the moisture content of the steam, the level of tempering, the die hole size and thickness of the die, Cooler air volume and drying time, packaging quality management, the influence of different climate and environmental factors, etc.*Feed ingredient moisture control1.