corn puff snack extruder line-manufacture,factory,supplier from China

How to Improve the Puffing Degree of Corn Puff SnackIn the production process of puffed food, uneven product discharging and spraying often occur, which affects the degree and effect of puffing. Today we will share with you some troubleshooting methods.1 Control of Puff Twin-Screw ExtruderDifferent puffing extruder machine equipment vary in the degree of puffing. Generally speaking, puffing equipment can control the time, temperature and pressure of raw materials under heating and pressurization conditions, thereby affecting the puffing degree of raw materials.

The breakfast cereal production line uses advanced puffing technology to instantly puff various cereal raw materials into crispy and nutritious breakfast cereals after high temperature and high pressure treatment. The entire production line consists of ingredients, mixing, puffing, drying, seasoning, cooling, packaging and other links. It has a high degree of automation and fast production efficiency.1 Ingredients: The ingredients of corn flakes are very important.

The automated fried snack manufacturing line makes powdered uncooked substances which includes corn flour into  fried snack through the method of blending,extruding,frying,flavoring and cooling. the same production line can produce fried snacks of numerous patterns and sizes. at the equal time, the identical  fried snack may be matched with precise device manufacturing lines in keeping with precise capability.

How to Produce Extruded Instant Yam PowderToday we are going to introduce a healthy and delicious snack - puffed yam powder! This snack not only has a unique taste, rich nutrition, but also has a variety of health functions, is the best choice for your healthy life. Technological processRaw material preparation → mixing → conveying → extrusion → conveying → drying → crushing → packagingNutritional value of extruded yam powderThe extruded yam powder process is a kind of healthy snack made of yam through multiple processes.

Wheat Bran Puffing Snack Making MachineWheat bran, a by-product of wheat flour processing, is yellow, flaky or powdery. There is part of the germ (that is, the part where the wheat sprouts) at the end of the wheat hull, accounting for about 5-10% of the total wheat hull. About 1/3-1/2 of the wheat hull has gone into the flour. The total wheat hull is Divided into 6 layers, the outer 5 layers contain more crude fiber, less nutrients, and are difficult to digest. Wheat hulls contain large amounts of B vitamins.

Abalone feed production line installationIn 2022, a Korean customer purchased a 1.5-2 ton abalone feed production line. Now the production line has been put into use. The returned 2-ton abalone feed production line has also arrived at the customer's factory, and the new production line is being installed and debugged.

Small Instant Noodle Production Line Successfully TestedOur new production line of instant noodles was put to the test last week. The test results were very successful.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.