corn puff extruder machine fully automatic line-manufacture,factory,supplier from China

How to Improve the Puffing Degree of Corn Puff SnackIn the production process of puffed food, uneven product discharging and spraying often occur, which affects the degree and effect of puffing. Today we will share with you some troubleshooting methods.1 Control of Puff Twin-Screw ExtruderDifferent puffing extruder machine equipment vary in the degree of puffing. Generally speaking, puffing equipment can control the time, temperature and pressure of raw materials under heating and pressurization conditions, thereby affecting the puffing degree of raw materials.

The breakfast cereal production line uses advanced puffing technology to instantly puff various cereal raw materials into crispy and nutritious breakfast cereals after high temperature and high pressure treatment. The entire production line consists of ingredients, mixing, puffing, drying, seasoning, cooling, packaging and other links. It has a high degree of automation and fast production efficiency.1 Ingredients: The ingredients of corn flakes are very important.

The twin-screw extruder is a kind of multi-screw extruder. It is developed on the basis of the single-screw extruder. In the barrel of the twin-screw extruder, two screws are placed side by side. Therefore, it is called twin-screw extruder. According to the relative position of the screw, it can be divided into meshing type and non-meshing type. The meshing type can be divided into partial meshing type and full meshing type. According to the rotation direction of the screw, it can be divided into two types: co-rotating and counter-rotating.

Breakfast cereal production line adopts advanced puffing technology, all kinds of cereal raw materials after high temperature and high pressure treatment, instant puffing into crisp, nutritious breakfast cereal.

After about two months of design and manufacturing process, a fully automatic fish feed production line with a capacity of 2t/h is ready to be loaded and shipped.The entire production line occupies 5 containers. After two days of hard work by the staff, it was successfully packed and shipped.

The twin-screw feed extruder is mainly composed of a barrel and a rotating extrusion twin-screw in the barrel. When the equipment is running, the material enters the material cavity through the feeding port, and the screw rotates and squeezes forward to be transported. Under the action of thrust, friction, shear force and heat, a high pressure and high temperature difference is formed inside and outside the cavity. The moment the material is extruded, Instant expansion due to pressure difference.

The Difference Between Extruder Production of Sinking Feed And Floating Feed - Expansion CoefficientIn the aquatic feed industry, extruders are widely used. The reason is that the materials produced by extruders are diverse and their maturity is higher than that of pelletizers, which causes much less environmental pollution. Many manufacturers generally Only floating materials are produced. Things to note when using an extruder to produce submersible materials:1. Formula: When designing the formula, it should be noted that the starch content should be low but not absent.

1. The surface of the particles is uneven(1). It has a great impact on the appearance of the finished product, and it is easy to collapse when put into water, and the utilization rate is low. The main reasons are:A. The raw materials are too coarsely pulverized. During the quenching and tempering process, they are not fully matured and softened, and they cannot be well combined with other raw materials when passing through the die holes.B. In the aquatic feed formula with high crude fiber content, steam bubbles are mixed in the raw materials during the conditioning process.

Key points of puffed feed production technology  The application of twin-screw extruder in the production of extruded feed The key to the production process of extruded feed lies in the extrusion process, and the twin-screw extruder is an important equipment to complete this process. The screw sleeve and screw in the extruder can squeeze and shear the feed material, and extrude the die hole under high temperature and high pressure environment. When being extruded, due to the effect of internal and external pressure difference, it can realize rapid expansion. role.

Abalone feed production line installationIn 2022, a Korean customer purchased a 1.5-2 ton abalone feed production line. Now the production line has been put into use. The returned 2-ton abalone feed production line has also arrived at the customer's factory, and the new production line is being installed and debugged.